Single tube tower and communication rod are belong to the pipe tower technology, including the working platform for connecting the tower body and the upper parts of the tower body.It provides a maintenance door under the bottom of the tower. the working platform should be provided with a door-to-door hole, and the antenna support is fixed on the fence of the working platform. Those utilities are characterized in that the climbing ladders are composed with the inside and outside connector of the main body, the main climbing ladder rod is fixed connected with the supporting frame, and the supporting frame is coupled with the connecting bracket inside the wall of the tower body. Advantages: simple structure, reasonable; beautiful; easy installation and use, less land. The flat surface should be necessary.
|Origin||China||Minimum Order||1 Sets|
|Payment term||L/C, T/T||Shipment term:||FOB, C＆F, CIF|
|Height||10to 45 Meter|
|Material||Q345B/A572,Minimum yield strength ＞=345N/mm2; Q235B/A36,Minimum yield strength ＞=235N/mm2; According to your request|
|Tolerance||According to your request|
|Surface test||Hot galvanization based on the standard of the steel technical specification on ASTM A123 , or the customer's request.|
|Connection Mode||Socket connection or Flange connection|
|Standard||ISO 9001:2008, ISO14001:2005, OHSAS18001|
|Per Section Length||Below 13 meters|
|Wind Pressure||0.35-1.00 KN/m2|
|Hot-dip Galvanization thickness||Plating thickness less than 5mm, Zinc thickness more than 65μm, Plating thickness more than or equal 5mm, Zinc thickness more than86μm, tolerance less than 10μm|
|Production Procedure||Original material test→cutting→bending→welding(fore-and-aft )→measurement checking→flange welding→making hole→making sample→surface clean→hot-galvanization and surface preparation→painting→re-check→packing|
|Packing||Pack in plastic paper or under customer's request|
|Shipment Date||Quantity||Delivery Day|
|50 sets||30 days|
★ We are very strictly in controlling the thickness of all the parts in hot-dip galvanization,all those parts stay with corrosion for years.If the process of hot dip galvanization is not good, it is easy to be rusted and affect the safety of the tower.
1. All the original materials and finished products should be 100% checking.
2. We already obtain the ISO 9001:2008, ISO14001:2005 and OHSAS18001 quality and safety certificate.
Split Charging → Partial Packing → Part Remark → Loading → Shipment
4G700MHz Cell Phone Signal Booster Cell Phone Antenna Booster For office
700MHz Full Band Signal Booster TE-723
700MHz Pico-Repeater is intended to strengthen the signal of 700MHz mobile phone in the buildings. Ideal for use in areas where the 700MHz signal is weak to cause Call dropout or Cant connection. The device improves the voice calls and data VOICE GPRS and EDGE (depends of the signal operator).
*High system gains.
*Full duplex and double-end design, external power supply, and convenient installation.
*ALC technology with auto-steady function adopted.
*Provide power indication and uplink and downlink indications.
*With the amplified linear power, the inter-modulation and spuriousness are suppressed effectively.
*The reliability conforms to GB6993-86 standards.
*The electromagnetic compatibility conforms to ETS300 609-4 standards.
It can be applied in Building rooms there have weak signal of mobile.
1. TE-7023 (Uplink:703-748MHz; Downlink:758-803MHz);
Gain:TE-7023(700MHz Uplink)Gp≥65dB; (700MHz Downlink)Gp≥70dB;
Output Power:TE-7023 ≥23dBm;
Pass band ripple:4G700MHz≤8dB;
Guard band rejection: 4G700MHz (BW-60DB) ≤104MHz;
I/O impedance: 50/N Connector;
I/O return loss: ≤-8dB;
Noise figure: ≤-8dB;
Power Supply: AC110-220V±10%/45-55Hz;
Reliability:To the GB6993-86 standard;
Electromagnetic:To the ETS300 694-4 standard;
a) Power supply LED denote
b) Export power LED denote
Order Information :
700MHz Pico-Repeater Model:TE-7023: Cover-max 100-500 square meters;
1 pcs booster
1 set power supply
1 pcs user manual
1 set installation screws