Guanheng is specialized in steel structure engineering since 1987.

Home  > PRODUCTS  > Radar Tower  > 

Radar telecom tower communication tower

Radar telecom tower communication tower

Radar telecom tower communication tower

MOQ
1
Payment Terms
T/T,L/C
Price Period
15
Tolerance
+-0.5
Height
10-45m
Origin
Foshan
Package
wood or bag package
Price
Get Latest Price
Get the latest price
Quantity Needed:
Pieces
E-mail:


Description:
The seamless steel pipe is usually used as the main material of the four tubes tower, which has low wind load coefficient and strong wind resistance. The main body adopts the outer flange connection, the bolt has been pulled, so it is difficult to destroy so that it can reduce the maintenance cost. The tower body has a positive triangle distribution, which accords with the physical law of triangle stability and saves steel materials,small area, reduce the cost of civil construction, convenient location. Light weight of tower, new trefoil cutting plate foundation, it reduces foundation cost. Truss structure design, convenient transportation and installation, short construction period. The tower with wind load curve design and smooth lines so it can avoid human and animal casualties. The design conforms to the national code for steel structure design and the design of tower mast structure Specification, this product is safety and reliability.scope of use: filed self-supporting tower, roof tower.



Product Parameter


OriginChinaMinimum order1set
Payment termL/C, T/TShipment termFOB, C&F, CIF
Height10 to 45meter
MaterialQ345B/A572,Minimum yield strength >=345N/mm2;  Q235B/A36,Minimum yield strength >=235N/mm2;  According to your request
ToleranceAccording to your request
Surface testHot galvanization based on the standard of the steel technical specification on ASTM A123 , or the customer’s request.
Connection ModeFlange connection
StandardISO 9001:2008, ISO14001:2005, OHSAS18001
Per Section LengthBelow 6 meters
Wind Pressure0.35-1.00 KN/m2
Hot-dip Galvanization thicknessPlating thickness less than 5mm, Zinc thickness more than 65μm, Plating thickness more than or equal 5mm, Zinc thickness more than86μm, tolerance less than 10μm
Production ProcedureOriginal material test→cutting→bending→welding(fore-and-aft )→measurement checking→flange welding→making hole→making sample→surface clean→hot-galvanization and surface preparation→painting→re-check→packing
PackingPack in plastic paper or under customer’s request
Shipment DateQuantityDelivery day
50 sets30 days



Product Details Comparison


Technology

Our Products
Each soldering seam is full,without solder slag,without solder skips,meet technical requirement.
VS
Other factory’s products
The other factory’s products have solder slag and solder skips,hidden danger.

Durable

Our Products
Zinc thickness is:99.7μm.
VS
Other factory’s products
If the zinc thickness is not enough, after some times, it will be rust,hidden danger.

 We are very strictly in controlling the thickness of all the parts in hot-dip galvanization,all those parts stay with corrosion for years.If the process of hot dip galvanization is not good, it is easy to be rusted and affect the safety of the tower.



Product Quality Standard


1. All the original materials and finished products should be 100% checking.

2. We already obtain the  ISO 9001:2008, ISO14001:2005 and OHSAS18001 quality and safety certificate.




Shipment


Split Charging  Partial Packing  Part Remark  Loading  Shipment



Customer Thank You Letter






Contact