Guanheng is specialized in steel structure engineering since 1987.

GH  >  AI - Page Sitemap  >  GH light weight cell phone tower suitable for comnunication system
GH light weight cell phone tower suitable for comnunication system

GH light weight cell phone tower suitable for comnunication system

1 set
Payment Terms
L/C, T/T
Price Period
According to your request
10 to 45 meters
Pack in plastic paper or under customer’s request
Get Latest Price
Get the latest price
Quantity Needed:
Application Scope
GH Steel Structure's communications tower has been widely used in many industries.With a focus on customers' potential needs, GH Steel Structure has the ability to provide one-stop solutions.
Company Advantages
1. Relying on advanced technology, GH cell phone tower is finely manufactured according to the lean production method.
2. The product features stable mechanical properties. The properties of the materials have been changed by heat treating and cooling treating.
3. The product has excellent and flexible temperature adaptability. It is sintered under high temperature which is up to more than 2500 degrees Fahrenheit.
4. Foshan Nanhai Guanheng Steel Structure Co.,Ltd's cell phone tower production capacity can be effectively scheduled according to the needs of customers.
5. A professional service during the purchase is guaranteed in Foshan Nanhai Guanheng Steel Structure Co.,Ltd.

GH light weight cell phone tower suitable for comnunication system-1
GH light weight cell phone tower suitable for comnunication system-2

The seamless steel pipe is usually used as the main material of the three tube tower, which has low wind load coefficient and strong wind resistance. The main body adopts the outer flange connection, the bolt has been pulled, so it is difficult to destroy so that it can reduce the maintenance cost. The tower body has a positive triangle distribution, which accords with the physical law of triangle stability and saves steel materials,small area, reduce the cost of civil construction, convenient location. Light weight of tower, new trefoil cutting plate foundation, it reduces foundation cost. Truss structure design, convenient transportation and installation, short construction period. The tower with wind load curve design and smooth lines so it can avoid human and animal casualties. The design conforms to the national code for steel structure design and the design of tower mast structure Specification, this product is safety and reliability.scope of use: filed self-supporting tower, roof tower.

Product Parameter

OriginChinaMinimum order1set
Payment termL/C, T/TShipment termFOB, C&F, CIF
Height10 to 45meter
MaterialQ345B/A572,Minimum yield strength >=345N/mm2;  Q235B/A36,Minimum yield strength >=235N/mm2;  According to your request
ToleranceAccording to your request
Surface testHot galvanization based on the standard of the steel technical specification on ASTM A123 , or the customer’s request.
Connection ModeFlange connection
StandardISO 9001:2008, ISO14001:2005, OHSAS18001
Per Section LengthBelow 6 meters
Wind Pressure0.35-1.00 KN/m2
Hot-dip Galvanization thicknessPlating thickness less than 5mm, Zinc thickness more than 65μm, Plating thickness more than or equal 5mm, Zinc thickness more than86μm, tolerance less than 10μm
Production ProcedureOriginal material test→cutting→bending→welding(fore-and-aft )→measurement checking→flange welding→making hole→making sample→surface clean→hot-galvanization and surface preparation→painting→re-check→packing
PackingPack in plastic paper or under customer’s request
Shipment DateQuantityDelivery day
50 sets30 days

Product Details Comparison


GH light weight cell phone tower suitable for comnunication system-3
Our Products
Each soldering seam is full,without solder slag,without solder skips,meet technical requirement.
GH light weight cell phone tower suitable for comnunication system-4
Other factory’s products
The other factory’s products have solder slag and solder skips,hidden danger.


GH light weight cell phone tower suitable for comnunication system-5
Our Products
Zinc thickness is:99.7μm.
GH light weight cell phone tower suitable for comnunication system-6
Other factory’s products
If the zinc thickness is not enough, after some times, it will be rust,hidden danger.

We are very strictly in controlling the thickness of all the parts in hot-dip galvanization,all those parts stay with corrosion for years.If the process of hot dip galvanization is not good, it is easy to be rusted and affect the safety of the tower.

Product Quality Standard

1. All the original materials and finished products should be 100% checking.

2. We already obtain the  ISO 9001:2008, ISO14001:2005 and OHSAS18001 quality and safety certificate.

GH light weight cell phone tower suitable for comnunication system-7
GH light weight cell phone tower suitable for comnunication system-8
GH light weight cell phone tower suitable for comnunication system-9
GH light weight cell phone tower suitable for comnunication system-10


GH light weight cell phone tower suitable for comnunication system-11
GH light weight cell phone tower suitable for comnunication system-12
GH light weight cell phone tower suitable for comnunication system-13

Split Charging Partial Packing Part Remark Loading Shipment

Customer Thank You Letter

GH light weight cell phone tower suitable for comnunication system-14

Company Features
1. Foshan Nanhai Guanheng Steel Structure Co.,Ltd has been recognized for decades as a industry leader in the development of cell phone tower .
2. Since the day of its establishment, Foshan Nanhai Guanheng Steel Structure Co.,Ltd highly values the quality of telecommunication tower .
3. We are always committed to becoming the top brand in the world camouflage tower industry. Check now! Our factory strives to achieve a strategic aim: the best brand in the world communications tower industry. Check now! GH Steel Structure sincerely wishes you a success in your business transaction. Check now! GH Steel Structure helps our customers to get the best value in return. Check now!





Warner Telecom offer you telecom BTS system :



Telecom shelter/PU equipment shelter radio base station

 Hybird system PU equipment shelter/telecom shelter
color steel plate
PVC static-free floor
China telecom level BTS


The shelter consist of :

shelter frame , outer Iron clad ,inner PU, PVC static-free floor ,Security emergency door . Inside provide with :

AC distribution system ,lighting system , Fire and Security Safes system . 2°degree leaning roof with perfect draining system .Two air-conditions(12000BTU) In additional with shockproof ,windproof ,damp proof, waterproof , lightening protection , heat insulation , Fire and Security Safes system .etc.







High Temperature Resistant  

 -60  +80



Anti-wind capability  





photochemical effect  

 Seal Rubber life time : 30 Years 30



shock resistance  

 8 Grade 8


 salt spray test  


salt spray test 4 days , paint slightly rust allow , no rust on zinc coat .



Outside shelter steel thick




 inner interlayer thick




Inner core materials heat transfer coefficient




Inner core materials compression strength  




adherence force




Shear stiffness  




Inner core materials Transverse rupture strength  





Inner core materials fire resistance  




water absorptivity     




Roof load




antistatic floor load








fire resistance  


According to B2 of GB 8624-1997 << Building Materials burning performance Hierarchical Methodology >>





Endure water pressure 0.2Mpa; Water spray intensity :10mm/min .( for 30 min)  

No leakage inside



relative humidity  






anti-corrosive paint( For container only)



Load on floor

8KN/ m2







Sandwich panel








Company information :



Shanghai Warner Telecom is a global leader in the manufacture and supply of telecommunications equipment,network solution and energy saving system. As a science & technology innovative company, we are dealing with the R&D, manufacture, distribution and after-sales services of optical network communication equipment, optical fiber cable distribution products, telecom shelters and outdoor telecommunication cabinets with it's related power system ,control system ,cooling system ,battery system etc .Head of company located in shanghai ,3 branch factory :  FTTX factory located in hebei with an area of more than 8,000 square meters, power control factory located in shenzhen and thermal control factory in suzhou . Warner has a well-established team of experts who can meet customers' specific needs accurately.
We are an ISO9001:2000 certified manufacturer and exporter, our products widely used in Telecom, Netcom, mobiles, underground projects, highways, airports and railways. China Telecom, China Mobile, China Unicom and huawei / ZTE as main customer domestically. Our products are widely exported to dozens of countries and regions, such as Russia, India, France, the USA, Australia, Malaysia and Singapore,  used by SingTel, Turk Telecom, BSNL India, Viettel, Etisalat, Telestra, Mobily-Saudi Telecom,Rostelecom etc.
AS a telecom projects / network solution / energy saving system integrator in China, We have strong advantages in organizational competitiveness,teamwork competitiveness ,cultural competitiveness and innovation competitiveness.10 years professional rich experience in design,production and  implementation of different projects around this world we have gained great reputation .Depending on standard science management, strict quality control and perfect technical service, we will continuously offer state-of-the-art & cost-effective products and solutions to our esteemed customers globally. We believe we will move to a brighter future together with your firmly support .




Special Note :
3 years warranty for non-electricals system .
12 month warranty for electricals system .
We accept TT,LC payment term .
Standard package for overseas business with EXW,FOB,C&F,CIF,DDU,DDP etc terms for your reference .
Free sparts & accessories for replacement during warranty time.
Life time free technical service available . 


Shanghai Warner Telecom


                                   AT Your Service




Product Description

Our company is a professional steel tower manufacturer with ISO certificates based in China..
Supported by the team of professional engineers,technicians,skill workers,we are dedicated to providing our global customers with high quality telecom towers .
The detailed information is specified in the following table.We sincerely look forward to cooperating with you. 
1.key Details:
Place of Origin: Hebei, China (Mainland) ; Brand Name: Jaoyao or OEM ; Model Number: Telecom Tower 
Surface treatment: Hot Dip Galvanizied or painted.
2.Packaging & Delivery:
Packaging Details: Telecom tower will be bundled by Galvanized strapping as per client's requirements.
Deliver:Shipped in 20 days after payment from Tianjin port
Tower members: One steel tower is separated into several bundles.
Bolts: Packing material is robust nylon bag or steel drum.
3. Technical Data

1. Design CodeTIA/EIA-222-G/F
Structure Steel
2. GradeMild SteelHigh Tensile Steel
GB/T 700:Q235B, Q235C,Q235DGB/T1591:Q345B, Q345C,Q3455D
ASTM A36ASTM A572 Gr50
EN10025: S235JR, S235J0,S235J2EN10025: S355JR, S355J0,S355J2
3. Design Wind SpeedUp to 250 km/h
4. Allowable deflection0.5 ~1.0 degree @ operational speed
5. Tension strength (Mpa)360~510470~630
6. Yield strength (t≤16mm) (Mpa)355235
7. Elongation (%)2024
8. Impact strength KV (J)27(20°C)---Q235B(S235JR)27(20°C)---Q345B(S355JR)
Bolts & Nuts
9. GradeGrade 4.8, 6.8, 8.8
10. Standards for mechanical properties
10.1 BoltsISO 898-1
10.2 NutsISO 898-2
10.3 WashersISO 6507-1
11. Standards for Dimensions
11.1 BoltsDIN7990, DIN931, DIN933
11.2 NutsISO4032, ISO4034
11.3 WashersDIN7989, DIN127B, ISO7091
12. MethodCO2 Shielded Arc Welding & Submerged Arc Welding(SAW)
13. StandardAWS D1.1
14. Method of marking of the membersHydraulic Press Stamping
15. Galvanization standard of steel sectionsISO 1461 or ASTM A123
16. Galvanization standard of bolts and nutsISO 1461 or ASTM A153
17. Factory testTensile test,Elements analysis, Sharpy test(impact test), Cold Bending, 
 Preece test,Hammer test
18. Maximum Production Capacity 50,000 TON per annum
In the production process of GH telecommunication tower, our experts keep the standards of the product in line. It is waterproof and is easy to clean
The whole production of GH cell phone tower is finely finished by our dedicated experienced production team. It is always tested by a variety of high precision equipment
The design style of GH camouflage tower keeps abreast of the popular trends. It is designed by our professional design and R&D team comprised of 20 staffs
The production of GH tower communication service conforms to the industry standards. It has been proven to be tolerant to both high and low temperature
GHcommunications tower is manufactured under modern management system. It is updated frequently, almost every week
This product stands out for its chemical resistance. Its surface is covered with a dense chemical coating that is stable and hardly chemically reacts with other substances. Its color is bright and fashionable and is not easy to fade
Product Message