The materials of angle tower are mainly made of angle steel.According to the number of cross sections,there are triangle tower, for angle tower, pentagonal tower,hexagonal tower,octagonal tower,the most popular for communication tower are: triangle tower and four angle tower. The wind load coefficient of angle tower is small and wind resistance is stronger.The connection between angle steel and angle steel are by pieces.its character is bolt tension, hard to destroy and less cost for maintenance.Angle tower is square layout,the main characteristic is that assembling by angle steel, less processing and welding,scope of use: filed self-supporting tower, roof tower.
|Payment term||L/C, T/T||Shipment term||FOB, C＆F, CIF|
|Height||10 to 45meter|
|Material||Q345B/A572,Minimum yield strength ＞=345N/mm2; Q235B/A36,Minimum yield strength ＞=235N/mm2; According to your request|
|Tolerance||According to your request|
|Surface test||Hot galvanization based on the standard of the steel technical specification on ASTM A123 , or the customer’s request.|
|Connection Mode||Flange connection|
|Standard||ISO 9001:2008, ISO14001:2005, OHSAS18001|
|Per Section Length||Below 6 meters|
|Wind Pressure||0.35-1.00 KN/m²|
|Hot-dip Galvanization thickness||Plating thickness less than 5mm, Zinc thickness more than 65μm, Plating thickness more than or equal 5mm, Zinc thickness more than86μm, tolerance less than 10μm|
|Production Procedure||Original material test→cutting→bending→welding(fore-and-aft )→measurement checking→flange welding→making hole→making sample→surface clean→hot-galvanization and surface preparation→painting→re-check→packing|
|Packing||Pack in plastic paper or under customer’s request|
|Shipment Date||Quantity||Delivery day|
|50 sets||30 days|
★ We are very strictly in controlling the thickness of all the parts in hot-dip galvanization,all those parts stay with corrosion for years.If the process of hot dip galvanization is not good, it is easy to be rusted and affect the safety of the tower.
1. All the original materials and finished products should be 100% checking.
2. We already obtain the ISO 9001:2008, ISO14001:2005 and OHSAS18001 quality and safety certificate.
Split Charging → Partial Packing → Part Remark → Loading → Shipment
Steel Tower Name
60m Iron Steel Lattice Guyed WIFI Tower
|Galvanized||Hot Dip Galvanized|
|Antenna Type||MW, GSM, CDMA etc.|
|Antenna Load||up to clients|
|Nuts and Bolts||6..8 and 8.8 available|
|Life Time||more than 20 years|
|Tensile test,Elements analysis, Sharpy test(impact test), Cold Bending, Preece test, Hammer test etc.|
Guyed tower has a novel appearance,and its biggest characteristic is strengthened by using steel guy wire. Guyed tower is a common type of communication tower which is economical and practical. It is lighter and cheaper than the others. It is very suitable for the geographical wide areas.
Tower Fabrication and HDG Flow Chart
Test Before and After Fabrication
Delivery: within 15-45 days after deposit received usually
MOQ: 1 set for Customized.
Payment: 30% deposit and 70% by T/T or L/C at sight before shipping Typically.
Other payment methods can be negotiated.
Mainly Products Type:
|1. Monopole Telecommunications Towers||8. Light Telecommunication Tower|
|2. 3 Legs Telecom Towers||9. Garden Monopole Telecommunication Towers|
|3. 4 Legs Communication Towers||10. Roof Landscaping Telecom Towers|
|4. Telecom Integrated Base Station||11. Mono Pole Power Transmission Tower|
|5. Angle Steel Communication Tower||12. Angle Steel Power Transmission Tower|
|6. Bionic Pine Tree Telecommunication Tower||13. Electrical Substation Structure|
|7. Bionic Artificial Coconut Tree Telecom Towers||14. Solar PV Structure|