Single tube tower and communication rod are belong to the pipe tower technology, including the working platform for connecting the tower body and the upper parts of the tower body.It provides a maintenance door under the bottom of the tower. the working platform should be provided with a door-to-door hole, and the antenna support is fixed on the fence of the working platform. Those utilities are characterized in that the climbing ladders are composed with the inside and outside connector of the main body, the main climbing ladder rod is fixed connected with the supporting frame, and the supporting frame is coupled with the connecting bracket inside the wall of the tower body. Advantages: simple structure, reasonable; beautiful; easy installation and use, less land. The flat surface should be necessary.
|Origin||China||Minimum Order||1 Sets|
|Payment term||L/C, T/T||Shipment term:||FOB, C＆F, CIF|
|Height||10to 45 Meter|
|Material||Q345B/A572,Minimum yield strength ＞=345N/mm2; Q235B/A36,Minimum yield strength ＞=235N/mm2; According to your request|
|Tolerance||According to your request|
|Surface test||Hot galvanization based on the standard of the steel technical specification on ASTM A123 , or the customer's request.|
|Connection Mode||Socket connection or Flange connection|
|Standard||ISO 9001:2008, ISO14001:2005, OHSAS18001|
|Per Section Length||Below 13 meters|
|Wind Pressure||0.35-1.00 KN/m2|
|Hot-dip Galvanization thickness||Plating thickness less than 5mm, Zinc thickness more than 65μm, Plating thickness more than or equal 5mm, Zinc thickness more than86μm, tolerance less than 10μm|
|Production Procedure||Original material test→cutting→bending→welding(fore-and-aft )→measurement checking→flange welding→making hole→making sample→surface clean→hot-galvanization and surface preparation→painting→re-check→packing|
|Packing||Pack in plastic paper or under customer's request|
|Shipment Date||Quantity||Delivery Day|
|50 sets||30 days|
★ We are very strictly in controlling the thickness of all the parts in hot-dip galvanization,all those parts stay with corrosion for years.If the process of hot dip galvanization is not good, it is easy to be rusted and affect the safety of the tower.
1. All the original materials and finished products should be 100% checking.
2. We already obtain the ISO 9001:2008, ISO14001:2005 and OHSAS18001 quality and safety certificate.
Split Charging → Partial Packing → Part Remark → Loading → Shipment
Steel monopole consists of tower body and platform. There is an opening on the bottom level of tower body and another
opening up to the same level with platform. The ladder is fixed to the handrail of platform. Monopole is characterized by
the ladder and feeders which are installed inside the tower body. Protected from the wind and rain and other natural
environmental destructive factors, it is convenient for maintenance and long-life use.
5m ~80 m
Airport ,seaport,plaza,stadium ,square,highway,street way etc
Conoid ,Multi-pyramidal,Columniform,polygonal or conical
Usually Q345B/A572,minimum yield strength>=345n/mm2
Q235B/A36,minimum yield strength>=235n/mm2
As well as Hot rolled coil from Q460 ,ASTM573 GR65, GR50 ,SS400, SS490, to ST52-3
Torlance of dimenstion
Cable and Ladder inside or outside as request or design
Working &Resting Platform
1~3 pcs at the top or in the middle
Design Load in Kg
300~ 1000 Kg appliced to 50cm from the to pole
Nane palte through rivert or glue ,engrave ,emboss as per customer requirement
Hot dip galvanized Following ASTM A 123, color polyester power or any other standard by
Joint of Poles
Insert mode,innerflange mode,face to face joint mode
Design of pole
Against earthquake of 8 grade
Minimum yield strength
Minimum ultimate tensile strength
Length of per section
Within 14m once forming without slip joint
We has past flaw testing.Internal and external double welding makes the welding beautiful
Welding Standard :AWS ( American Welding Society ) D 1.1
1 mm to 30 mm
Rew material test → Cuttingj →Molding or bending →Welidng (longitudinal )→Dimension
verify →Flange welding →Hole drilling →Calibration → Deburr→Galvanization
or powder coating ,painting →Recalibration →Thread →Packages
Our poles as normal cover by Mat or straw bale at the top and bottom ,anyway also can
following by client required , each 40HC or OT can loading how many pcs will calculation
base on the client actually specification and data.
Material Test and Sample
1 All of our material are purchased from famous mill factory to assure the quality
2 A mill certificate issued by the mill factory with stamp and signature must be provided before unload the material in our factory ,
otherwise we have our reason to refuse the material .
3 Before put into production ,all the material must pass the chemical and physical analysis to make sure that they have meet the
requested strength and component.
1 Shape testing:
2 Testing after Galvanized:
3 Tensile testing
30% in advance and 70% before shipment for our products
BAODE Solar Lighting Co., Ltd., as one of the most professional solar LED outdoor lighting manufacturers, is your reliable
solar lighting solution provider. BAODE has obtained the ISO9001: 2000 International Quality System Certification and our
products comply with CE and SGS criteria.. Since 2008, BAODE has introduced over 80,000 reliable and cost-effective solar powered lighting systems in more than 50 countries all over the world.
Why Us ?
You can find solutions for almost all outdoor lighting from us, like street lighting, square lighting, landscape lighting, traffic
lighting and commercial lighting and so on.
Vertically Integrated Production System
15 Years Manufacturing Experience
Since 1998, we have started manufacturing street lighting. The 15 years’ experiences have been a persuasive insurance
for us to offer reliable products.
Large Factory with Complete Facility
We have 400 staffs with factory area 6000 m2. We also equipped with complete production and testing equipments,
such as Steel Pole Rolling Machine, Spray Machine, Pressure Machine, Integrating Sphere, Lighting Simulating
Machine and Weather-ability Testing Machines, etc . .
Our 60 experienced engineering team work with the PV institute of Shanghai FUDAN University , Shenzhen Foxconn to
R&D outdoor lighting products. We have obtained over 20 national patents and built our own brand LUYOU.
Manufacturing main components to save cost. BAODE manufactures the solar panel, light fixture and pole to control the
cost and quality.
Factory outlet. There’s no middleman between the manufacturer BAODE and domestic and oversea buyers.